1. Carpe Iter Holder
1.1. The Carpe Iter Holder is specifically designed for the Ci Pad. Do not use the Holder for any
other equipment than the Device.
1.2. The Holder will ensure secure mounAng and will also provide conAnuous charging for the
Device through the maAng pads on the back on the Device.
1.3. The Holder includes a power source that was designed specifically for the Device.
DO NOT
use the power source to power any other equipment than the Device
.
1.4. DescripAon:
1.5. Holder installaAon requires at least basic mechanical and electrical skills. If you are in doubt,
have the Holder installed by a professional workshop.
1.6. Protect the charging pins in the Holder from mechanical damage. Especially take care when
inserAng the Device into the Holder not to hit the charging pins with the Device – they
could be damaged inside even if you cannot see any damage with naked eye. Damaged
charging pins will cause charging problems (no charging or insufficient charging).
1.7. Protect the charging pins from being connected to one another with electrically conducAve
materials.
1.8. MounAng Holder
1.8.1.
The base plate of the Holder contains 6 nuts for M5 screws. Screws are not
included.
1.8.2.
The mounAng nuts create a standard AMPS hole paTern (30x38mm) in the
landscape orientaAon.
