Pr
o
Minent ProMix
‘S & C’ Polymer Feeder
ProMix Series S&C User Manual
2.13 Feed Verification
Press
ENTER
and
DOWN
@
Polymer Pump
to navigate to
the polymer pump feed verification option.
Feed Verify
when switched
ON
is used to monitor the relay
pulse output from the polymer feed pump verifying that the 4-
20 mA signal from the controller is driving the pump. If this
Feed Verify
pulse signal is not active when the controller is
sending the 4-20 mA control signal to the polymer pump then a
pump failure alarm is actuated.
Feed Verify
can also be turned
OFF
in the case where the
polymer pump does not have the pulse feedback option. Press
the
RIGHT
key to alternate between
ON
and
OFF
and press
ENTER
to modify. Press
EXIT
to return to main menu.
Press
ENTER
and
DOWN
@
Polymer Pump
to navigate to
the polymer pump feed verification option pulse timing interval.
Feed Verify
is the time delay between pulse signals and may
be adjusted to any time from 1 to 300 seconds. If a pulse is not
received within this time period and
Feed Verify
is
ON
then a
pump failure alarm is actuated. Press
ENTER
to modify and
press the
RIGHT
key to change values.
Press
EXIT
to return to main menu
Feed Verify ON
switch =
Polymer 38.6%
Local RUN
Feed Verify
30 second
or
Polymer 38.6%
Local RUN
Feed Verify OFF
switch =
Verify on/off
then
Verify time interval
Sidebar:
The
Feed Verify
pulse signal from the pump is wired to the
FV
terminals on the Digital Input
accessory board.
Summary of Contents for ProMix C
