ProMinent ProMix C, Operating Instructions Manual

Page: 24 / 59

Pr o Minent ProMix
‘S & C’ Polymer Feeder
ProMix Series S&C User Manual
2.7 Status Message Summary
LCD Displays Feeder State
Offline STOP
Feeder powered.
On-Off-Remote switch at Off.
Lin<4mA, Fault
On-Off-Remote switch at Auto and 4-
20mA input less than 4 mA. Exits on
4-20mA >= 4 mA
or On-Off-Remote= Off or Manual
Flow Check
Waits user set seconds for Flow switch contact set closed
after Filling Mixer.
Exits on flow switch closed or On-Off-Remote= Off
No Water STOP
Exits on flow switch closed
or On-Off-Remote= Off
Filling Mixer
Inlet Solenoid ON & Mixer OFF. Waits
user set seconds to fill mixer. Exits on
On-Off-Remote= Off
No Ext.Run STOP
Polymer Pump, Mixer and Solenoid OFF
Exits on Remote Start contacts closed
or On-Off-Remote = Off
Flushing Mixer
Solenoid & Mixer ON. Polymer pump OFF.
Exits on flush time expired or No flow
or On-Off-Remote = Off
Flush Fail STOP
No Flow measured while flushing.
Exits on flush time expired or flow measured or
On-Off-Remote = Off
Remote RUN
Polymer pump @ 4-20mA input controlled setpoint. Exits on
no flow, control<0%, flush, Remote Start open, or On-Off-
Remote = Off or Manual.
Local RUN
Polymer pump @ user setpoint.
Exits on no flow, flush, Remote Start open or
On-Off-Remote = Auto or Off.
Flushed, Stopped
Press the
ENTER
key to Run
Flush ends.
Polymer Pump, Mixer and Solenoid OFF
Any key press restarts.
Sidebar:
Flow Check: The flow switch monitors dilution water flow into the mixer chamber.
Filling Mixer: The mixer chamber is filled once after every power ON cycle.
If you drain the mixer, switch the power OFF then ON to re-fill the mixer chamber.