ProMinent DULCOTEST CGE 2-4P-10 ppm, Operating Instructions Manual, Page: 32 / 68

Pr o Minent
® 32
14 Technical Data
Measured
variable Free chlorine and organically bound chlorine
Area of
application Drinking water, swimming pool water and water of a similar quality
Measuring range CGE 2-mA-2 ppm 0.02-2.0 mg/l
CGE 2-mA-10 ppm 0.1-10 mg/l
CGE 2-4P-10 ppm
0.1-10 mg/l
pH range 5.5 - 9.5
Temperature
range 5 - 45 ° C,
Temperature compensation
No sharp rises in temperature
Storage
temperature Frost-free between 5 and 50 ° C
Resolution Corresponds with the value at the lower end of the measuring range
Max. pressure DLG III A/B: 1 bar (free flow)
DGM: 3 bar (no pressure surges!)
Flow DLG III and DGM in-line probe housing Optimum: 30 l/h
Minimum: 20 l/h
Maximum: 100 l/h
Cross
sensitivity Bromine, iodine, ozone, ClO
2
, chloramines and other oxidising agents lead to
measurement errors
Conductivity
Test water 30 µ S/cm - 10.000 µ S/cm
Operating life
Membrane cap Typically 1 year depending upon the water quality
Materials Membrane cap: PPE Electrode holder: PMMA
Electrode adaptor: PVC Electronics: Electronic components
Power supply 16 - 24 V DC; min 35 mA at 16 V DC
Output signal 4 - 20 mA (mA-Variant)
0 - 2 V
(4P-Variant)
Enclosure rating IP 65
Technical Data
BA_DT_085_09_07_4spr.p65 13.09.2007, 14:18 Uhr 32