8
ASSEMBLY INSTRUCTIONS
Secondary
Support
Screw
Open Loop
Support
Washer
Secondary
Spring
Washer
10
9. Install secondary support screw, secondary spring
washer, and support washer partly into the side of the
brace installed in the ceiling. Then lift the braided cable up
and over the ceiling brace and place the open loop of the
braided cable around the secondary support screw.
Note:
The ceiling support brace may not be accessible
from below. If not, it must be accessed from above.
Important:
The braided cable must make a complete
circle around the support brace to secure the fan.
10. Tighten the secondary support screw securing the
braided cable.
9
8
Secondary
Support Screw
Braided Cable
Outlet
Box
Brace
SECONDARY HANGING SYSTEM
For installation in the United States:
Building codes
in the U.S.A. do not require installation of a Secondary
Hanging System. If desired, the braided cable can be cut
and removed using wire cutters (sold separately).
Skip to
Step11.
For installation in Canada:
In compliance with building
codes in Canada, installation of the Secondary Hanging
System is required.
8. Feed the loop of the braided cable, preassembled to the
motor assembly, up through the outlet box mounted in the
ceiling.
Summary of Contents for 51484
Page 1: ......