Downrod
Clip
Set Screw
Yoke
Downrod
Pin
Downrod
6
ASSEMBLY INSTRUCTIONS
1
3
2. Loosen all four mounting bracket screws and
completely remove the two screws from the round holes
in the canopy. Then remove mounting bracket from the
canopy and save them for later. Remove the canopy from
the mounting bracket. Install the mounting bracket to
the outlet box (sold separately) using the screws and
washers provided with the outlet box.
WARNING:
To reduce the risk of fire, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
Mounting Bracket Screw
2
4
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER:
Failure to disconnect the power supply prior to
installation may result in serious injury or death.
3. Remove the downrod clip and downrod pin from the
downrod. Then loosen but do not remove the two set
screws in the yoke at the top of the motor assembly.
4. Insert the downrod through the canopy and yoke
cover. Feed the wires and braided cable from the fan
through the downrod.
Canopy
Braided
Cable
Yoke Cover
Downrod
Yoke
Summary of Contents for 51484
Page 1: ......