11
MONITOR SETUP
LINKING TRANSMITTER AND MONITOR
1.
Ensure three AA batteries are inserted in the wireless
energy monitor. Observe polarity when inserting the batteries.
2.
Press the
link
button on the back of the wireless energy
monitor and hold for two seconds. The transmission signal
symbol will flash for one minute or until the transmitter and
monitor are linked.
3.
While the transmission signal symbol in the display
flashes, push the
link
button on the transmitter and wait until the
transmission signal symbol becomes solid.
Note:
The default value for the transmission frequency is ten
seconds. This means the transmitter is sending information to
the display every ten seconds. You can change the frequency
from 10s to 15s or 20s by pushing and holding the transmitter
button for two seconds.
Potable display unit link button
Transmitter link button
Transmission Signal Symbol
Dashes indicate signals not linked
