ProMed PBM-3.5, Instruction Leaflet

Page: 28 / 156

DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
28
Errors seem to occur
during inflation
Put the arm cuff on correctly.
Check whether the tube connecting
piece is correctly inserted in the device.
Check whether there is a hole in the tube
or arm cuff.
Abnormal blood pres-
sure
Relax for at least 30 minutes, then re-
measure. If you get the same results, you
must see your doctor immediately.
Batteries flat Replace the old batteries with new ones.
Troubleshooting
Problem
Possible cause to be
checked
Solution
No electricity Check the batteries Replace with new ones
Check that the batteries
have been correctly in-
serted (polarity)
Insert batteries correctly
The device does
not pump
Check whether the tube
connecting piece is correct-
ly inserted in the device
Insert the tube connecting piece gently
into the connection
Check whether the tube
connecting piece is intact Replace with a new tube connecting
piece
Error and/or
inter ruption of
the measurement
Check whether the arm is
laying still and relaxed
Ensure a calm and relaxed position
Was there talking during
the measurement?
Do not speak during the measurement
The arm cuff
does not fill
with air
Check that the arm cuff is
on properly
Fasten the arm cuff correctly
Check whether the arm cuff
or tube has a hole
Replace the arm cuff with a new one
If the fault cannot be rectified, contact the manufacturer before you try to repair the
device yourself.
I
NBETRIEBNAHME