USER’S MANUAL. TV EXPLORER II/II+
Page 88
12/2013
The
COMMANDS
option from
DiSEqC
menu allows to execute any of the
following commands:
CHARACTER COMMAND
ASSOCIATED
PARAMETER
POWER ---
RESET ---
STANDBY ---
General
SAT A/B
A / B
SWITCH 1
A / B
SWITCH 2
A / B
SWITCH 3
A / B
Non-assigned Switch
SWITCH 4
A / B
POSITION A/B
A / B
Assigned Switch
SWITCH OPTION A/B
A / B
DISABLE LIMITS
---
ENABLE LIMITS
---
LIMIT EAST
---
LIMIT WEST
---
DRIVE EAST SEC.
1 to 127
DRIVE EAST STEPS
1 to 127
DRIVE WEST SEC.
1 to 127
DRIVE WEST STEPS
1 to 127
GOTO POSITION
1 to 255
HALT ---
STORE POSITION
1 to 255
Positioner
RECALCULATE
1 to 255
Table 5.-
Available DiSEqC commands.
When selecting the
COMMANDS
option in the
Spectrum Analyser
mode
[13] in the screen will appear a dynamic execution line in order to use with the
positioner commands:
DRIVE EAST
/
WEST
. This allows to carry out a fine adjustment
in steps or in seconds to aim the antenna through the rotary selector [1].
70
60
50
40
FREQ.:
POWER:
12108.1
DRIVE EAST (STEPS)
CH:
SPAN:
200 MHz
1508.80
MHz
64.4 dB
5
Figure 65.-
DiSEqC commands: DRIVE
Press the DiSEqC key [21] on frontal panel in order to quit the commands
execution mode and to locate the mark cursor on the frequency or channel.
