USER’S MANUAL. TV EXPLORER II/II+
Page 40
12/2013
5.12
Spectrum exploration function (EXPLORER)
The
Exploration
function allows exploring the full frequency band in order to
identify the analogue channels and digital presents, in agreement with the configuration
set, over the active channel plan. In order to activate the function hold pressed the
[25] key until the
EXPLORER
screen appears.
TESTING CHANNEL SET:
66
67
68
69
FOUND: 38 / 101
PROCESS SUCCESSFUL
EXIT
CCIR
ANALOG: PAL BG
DIGITAL: DVB-T/H
DIGITAL: DVB-T/H
DIGITAL: DVB-T/H
0 25 50 75 100%
SAVE AS:
STATION1
Figure 18.-
Spectrum exploration screen.
EXPLORER
.
When the instrument completes the exploration, a new channel plan is generated
based on the active channel plan. This new channel plan contains only the channels that
have been identified and the rest are removed. The equipment offers the possibility of
saving in memory the channel plan generated to use later. If the new channel plan is not
saved it will remain active until the instrument is powered off or some other plan is
loaded.
NOTE
:
In the case that is desired to explore or identify
DVB-C
signals will be
necessary to select previously
DVB-C
standard as digital signal
identifier
by means of
[22]
PREFERENCES
menu.
5.13
Measurements configuration
With the aim of taking the measurements of all types of signals some times could
be necessary that user enters parameters relative to particular characteristics of these
signals, whether an automatic detection has not been possible, or these parameters
differ from the standard corresponding ones.
