USER’S MANUAL. TV EXPLORER II/II+
Page 16
12/2013
STEP 3.- To carry out a complete channel band exploration
1.
Select the frequency band to explore
[14] (terrestrial or satellite).
2.
Activate the exploration process by holding
[25] key pressed.
3.
Press
[10] key to visualise the channels detected and
[6] to change
between channels from detected channels list.
STEP 4.- To carry out the tuned channel identification
1.
Select the frequency band to explore
[14] (terrestrial or satellite).
2.
Activate the identification process pressing once on
[25] key.
3.
Press
[10] key
to visualise the
signal detected from channel or frequency
identified or
[13] to monitor the corresponding spectrum.
NOTE:
In the case that is desired to explore or identify
DVB-C
signals it is
necessary to select previously
DVB-C
standard as digital signal identifier
through
[22]
PREFERENCES
menu.
STEP 5.- Making measurements
1.
Select the channel or
frequency
[24] to measure by means of the rotary selector
[1].
2.
Press
[12] key to select the type of measurement until on screen appears the
corresponding measurement.
