Promax EN-106, Manual

Page: 18 / 34

USER’S MANUAL. EN-106
03-2012 Page 12
AUDIO GAIN : Audio gain at the input. Available values are from
–12 dB to +30 dB (By default: 0 dB).
AUDIO MODE
: Type of audio to encode. Available options are Stereo,
Mono, Dual and Joint Stereo (By default: Stereo).
AUDIO
BITRATE
: Bitrate to encode the audio. Available values are
between 96 kbit/s and 384 kbit/s (By default:
256 kbit/s).
Note : For bitrates of 224 Kbit/s or greater, the audio
mode can not be mono.
VIDEO STD : Standard of the video input (PAL, NTSC or SECAM).
(By default: PAL).
ASPECT RATIO
: Aspect ratio applied when encoding the video (4:3,
16:9). (By default 16:9).
CHANNEL BW:
Channel bandwidth (6, 7 or 8 MHz). (Default value
according to the user’s country; consult the table with
pre-set values).
CARRIERS: Signal transmission mode, 2K or 8K. (Default value
according to the user’s country; consult the table with
pre-set values).
GUARD INTER. : Safety signal margin (1/4, 1/8, 1/16, 1/32). (Default
value according to the user’s country; consult the table
with pre-set values).
CONSTELLA.:
Constellation type used to transmit signal (QPSK,
16QAM, 64QAM). (Default value according to the user’s
country; consult the table with pre-set values).
CODE RATE
: Available values are (1/2, 2/3, 3/4, 5/6, 7/8). (Default
value according to the user’s country; consult the table
with pre-set values).
LANGUAGE : Language used on the menus. It can be Spanish,
English, French or Italian.
VERSION : It shows the firmware version installed in the
instrument. This option is not editable.