background image

 

 

CHARGING WITH AC ADAPTOR 

1.

 

Keep all power on/off switches in OFF position while charging. 

2.

 

Completely charge your power station before using it for the first time. 

3.

 

Press test button to check battery voltage 

“VDC”,

 if battery voltage reads <12V, it is necessary to recharge the Power 

Station immediately for smooth running. 

4.

 

Before recharging from an AC outlet, be sure the source is right. (i.e.110 volts or 230 volts) 

5.

 

Use only the chargers provided with unit. 

6.

 

Plug the AC charging cord into any standard wall outlet and the other end into the AC/DC charging input socket. The RED 
LED will illuminate which indicates the unit is charging and it will turn into GREEN LED when it is fully charged. 

First time charge: 

………………………………...

  24 hours 

Recharge and subsequent 

charges……………. Until

 charging LED lights to Green 

 

 

CHARGING WITH DC ADAPTOR 

Due to safety circuits built into the input-charging jack, DC charging through this port will not fully charge the battery. 

1.

 

Keep all power switches in OFF position while charging. 

2.

 

Insert DC adapter plug into charging port of power station and the other end into the cigarette lighter socket of your vehicle. 

The  RED  LED  will  illuminate  which  indicates  the  unit  is  charging  and  it  will  turn  into  GREEN  LED  when  it  is  fully  charged. 

Vehicle should be running for full charging to take place and to avoid draining the battery. 

NOTE: This method allows battery to be topped up during a journey but may not fully charge the unit. Disconnect charging cord 

before turning off engine. NEVER leave vehicle running in an enclosed or poorly ventilated space. 

 

CHARGING WITH SOLAR PANEL 

1.

 

Keep all power switches in OFF position while charging. 

2.

 

Insert the Solar panel connection plug into solar charging port of power station and the other end into the solar panel, 

the RED LED 

will illuminate which indicates the unit is charging. And it will turn to GREEN LED when it is fully charged. 

 

CHARGING TIPS AND WARNINGS 

Keep battery charged, ready for emergencies. Unlike some rechargeable batteries, frequent charging will not harm and in fact, 

will improve the performance of the internal battery. Recharge battery as soon as possible after each use to prolong battery life. 

Frequent heavy discharges between recharging will reduce battery life. Do not leave the Powerstation totally discharged for an 

extended period of time as this can cause battery failure. All lead acid batteries suffer from self-discharge over time, especially 

under extreme temperatures. 

Store in a cool dry place. 

Recharge every 3 months when not in use and more frequently in warmer or colder storage conditions. 

Do not continuously charge the power station for more than 30 hours. Use only the charging adaptors provided with this unit. 

DO NOT OPERATE THE UNIT WHILE CHARGING. 

Summary of Contents for 120













Reviews: