8
materials up to 115 mm thick or 233
mm wide, depending upon the
thickness or width of the material
and the angle setting at which the
cut is being made.
SELF-RETRACTING
LOWER
WHEEL GUARD
The lower wheel guard provides
protection from each side of the
wheel. It retracts over the upper
wheel guard as the wheel is lowered
into the workpiece.
VICE CLAMP
Avice clamp has been provided with
your cut-off machine. It is located on
the end of the vice screw and
provides greater control by clamping
the workpiece to the fence. It
also prevents the workpiece from
creeping toward the wheel during a
cutting operation.
ADJUSTABLE FENCE
The fence on your cut-off machine
has been provided to support the
workpiece and provide clamping
support to the vice for holding your
workpiece securely when making all
cuts. It is an adjustable fence that
has been provided to make your
cut-off machine more versatile. It
adjusts from 0° to 45° to the left and
right for making angled cuts. The
hole pattern allows it to be moved
forward when making cuts in tall or
thick stock, such as square stock or
tube stock. The hole pattern allows it
to be moved back when making cuts
in stock that is thin or wide, such as
angle stock.
QUICK LOCK-RELEASE LEVER
Alock lever has been provided on
your cut-off machine. This feature
allows you to open and close the
vice clamp quickly without repetitive
turning of the vice crank handle.
CARRYING HANDLE
For convenience when carrying or
transporting your cutoff machine
from one place to another, a carrying
handle has been provided on top of
the machine arm. To transport, turn
off and unplug your machine, then
lower machine arm and lock it in the
down position. Use the transport
chain to lock machine arm in the
down position.
SPINDLE LOCK BUTTON
A spindle lock button has been
provided for locking the spindle
whilst changing the abrasive wheel.
Pull the spindle lock button while
installing, changing, or removing
wheel only.
ADJUSTMENTS
WARNING
To prevent accidental starting
that could cause possible serious
personal injury, assemble all parts
to your cut-off machine before
connecting it to power supply.
Machine should never be
