Promaker PRO-SD360, User Manual

Page: 4 / 24

4
The numbers in the text refer to
the diagrams on pages 2 - 3.
Read the operating
instructions carefully before
using this device. Familiarise
yourself with its functions and
basic operation. Service the device
as per the instructions to ensure
that it always functions properly.
The operating instructions and the
accompanying documentation must
be kept in the vicinity of the device.
Introduction
This screwdriver is intended for
tightening and loosening screws
(Fig. 2 - 9). The screwdriver is not
suitable for screwdriving heavy
constructions, for example repairing
a big fence.
1. MACHINE INFORMATION
Specifications
Battery Li-ion
Voltage 3.6V Li-ion
Speed 220rpm
Weigh 0.81lbs
Max Torque 3Nm
Vibration level
The vibration emission level stated
in this instruction manual has been
measured in accordance with a
standardised test given in EN
60745; it may be used to compare
one tool with another and as a
preliminary assessment of exposure
to vibration when using the tool for
the applications mentioned.
• Using the tool for different
applications, or with different or
poorly maintainted accessories,
may significantly increase the
exposure level.
• The times when the tool is
switched off or when it is running
but not actually doing the job,
may signifi cantly reduce the
exposure level
Protect yourself against the effects
of vibration by maintaining the tool
and its accessories, keeping your
hands warm, and organizing your
work patterns.
Contents of packing
1 Cordless screwdriver
1 Charger
1 Instruction manual
Check the appliance, any loose
parts and accessories for damage
caused during transport.
Product information
Fig. 1
1. Bit holder
2. On/Off-switch
3. Softgrip
4. LED (Red)
5. Charger connection
6. Extension piece
7. Bit
8. LED (White)