Promaker PRO-SD360, User Manual

Page: 6 / 24

6
Class ll machine. Your machine
is double insulated; therefore no
earthwire is required.
Replacing cables or plugs
Immediately throw away old
cables or plugs when they have
been replaced by new ones. It is
dangerous to insert the plug of a
loose cable in the wall outlet.
3. ASSEMBLING INSTRUCTIONS
Inserting and removing bits
Fig. 1+7
The bits can easily be placed directly
into the bit holder or on the extension
piece. The extension piece can be
used for screws that are difficult to
reach.
4. OPERATION
Always observe the safety
instructions and applicable
regulations.
Firmly hold the machine and ferm
the bit with even pressure into
the workpiece. Do not force the
machine. Use only bits that do not
yet show any signs of wear. Worn
bits have a negative effect on the
efficiency of the machine.
Locking the screwdriver
Fig. 8
The screwdriver is fitted with an
automatic spindle lock feature.
When the On/Off switch (2) is not
pressed, the spindle is locked. Now
it is possible to use the screwdriver
(even when the battery is empty) as
a manual tool.
Screwdriving
Fig. 1
• To switch the tool on, press the On/
Off switch (2).
• Press the tumbler switch (R)
for clockwise rotation (tightening
screws)
• Press the tumbler switch (L) for
counterclockwise rotation (loosening
screws).
To switch the tool off, release the on/
off switch.
The white LED will illuminate when
the tumbler switch is pressed.
Warning! Looking straight into
LED light for a prolonged period of
time from close distance can cause
damage to the eyes.
User tips for optimum use
• Always hold the tool and screwdriver
bit in a straight line with the screw
and always use the correct type and
size of bit.
• If screws are difficult to tighten, try
applying a small amount of washing
liquid or soap as a lubricant (Fig. 9).
• Use the spindle lock feature to
loosen very tight screws or to firmly