33
TECHNICIAN PROGRAMMING
Press Stop
and Decrease
buttons at the same time and hold them pressed until the
following is displayed:
Easymix120Plus01
******PROG******
and after that the first programming step (Heating Hysteresis).
If necessary, modify the step setting using the buttons
and
.
Press Stop
to access the following steps. In this way, the steps listed in the table below, all
editable with the Increase and Decrease buttons, will be shown in sequence.
To exit user programming, wait for about 30" without pressing any button or press Beating
to
force quit.
The values that have been modified will be automatically saved.
