Promac SY-350V, Operating Instructions Manual

Page: 5 / 77

4. Machine dimensions, Transport, Installation and
Dismantling
4.1 Machine dimensions
4.2 Transporting the machine
When transporting in its own packaging, use a forklift
truck or hand trolley.
4.3 Technical characteristics
Cutting Capacity
0° 85mm 120mm 105 x 105mm 160 x
90mm
45° 75mm 100mm 85 x 85mm 85 x
70mm
Main motor 3HP / 4 pole
Spindle speed 24 – 120 rpm
Vise opening max. 170mm
Cooling pump 1/8 HP
Coolant tank 5 l
Machine weight (with stand) 250 kg
Machine dimensions (with stand) 1200x990x1720mm
Stand dimensions
600x580x720mm
11.2 Noise emission
Acoustic pressure level (EN 11202):
Idling Lpa 71,0 dB(A)
Operating Lpa 83,8 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
5. Getting to know your machine
5.1 Disk head assembly
The section of the machine composed motor, gear transfer
system, disc or blade, and control handle.
A: Control Lever
A long angled lever with a handle grip and trigger switch for
starting, raising, and lowering the disk head
B: Transfer Case
The central part of the assembly, housing the gear system
and oil tank.
5.2 Machine base
A heavy cast iron structure that supports the miter system,
vise system, and head assembly.
5