13
Chapter 7
OPERATING INSTRUCTIONS
HINT:To set same programs for Monday to Friday, you may set the
programs for every day first and then disable Saturday and Sunday. You
may review the programs by doing the same as in programming. Just
beware not to accidentally set the every day programs as this will also
set and change the programs of all the days.
Setting Scent Intensity
1. Consult the
, which provides a setting for the size in cubic feet (length x width x ceiling
height) of the space you are treating. Use the indicated intensity setting as a starting point from which
you can increase or decrease to taste. Number of fresh air changes per hour and user preference will
affect settings.
2. Press the power button on. Turn the dial to
Program and set the intensity level with the +/– keys. You
will see the level numbers (1 to 50) on the right side of the screen.
Hint: There are many variables to finding the scent level that works:
size, airflow, number of fresh air changes per hour, number of
people in the space and, most of all, user preferences. Experiment
with different levels until you are satisfied. Utilize the S3 Tool.
Scent Control
If you followed the
or S3 Tool, you have set AQ1200 to the low end of the range for your
room size. If after one hour you feel the scent is not detectable, increase the setting by about 10%. For
example, if your start setting was 20, increase it by 10%, or to setting 22. Keep increasing until you and
others in the space can detect a slight scent throughout the space.
The Last Step
1. Set the appliance to either
24/7 or Run Program.
2. Make sure the power is on. The blue light will show through the button.
3. Close and lock the door, storing the key in a known place.
7