Air/Q 1100-Avian User Guide
© 2010 Prolitec, Inc.
E. Programming the Air/Q 1100-Avian
Programming is simple from instructions on the machine itself. Basically, you can program start and stop
times and the intensity level.
1. Scent intensity can be adjusted from 1 to 50. Turn the power on and use the +- keys to change inten-
sity. For spaces smaller than 150,000 cubic feet consult the Settings Table below. It is only a guide and
subject entirely to conditions in the space.
Settings Table
Output Level Range Settings Space to be treated
(in Cubic Feet)
Space to be treated
(in Cubic Meters)
1 thru 5
1,800-8,000
50-230
6 thru 10
8,000-17,000
230-480
11 thru 15
17,000-28,000
480-790
16 thru 20
28,000-40,000
790-1,130
21 thru 25
40,000-53,000
1,130-1,500
26 thru 30
53,000-69,000
1,500-1,900
31 thru 35
69,000-86,000
1,900-2,400
36 thru 40
86,000-104,000
2,400-3,000
41thru 45
104,000-126,000
3,000-3,600
46 thru 50
126,000-150,000
3,600-4,200
2. Start times can be set by turning the dial to start and then using the +- keys to set the start time. The
Stop time is set the same way.
Hint: There are many variables involved in finding the right settings
for Avian Plus. The installer should experiment to determine the
lowest setting level that is effective in controlling birds. Start low
and move it up as needed until the birds scram.
F. The Last Step
1. Set the dial to either 24/7 (recommended) or Program if you have programmed a start/stop time (see
Commissioning the Air/Q Avian on page 6 for details).
2. Make sure the power is on. The blue light will show through the button.
3. Close and lock the door, storing the key in a known place.
8
Bird Control General Considerations
