Default Module Configuration Assignments
6201-WA-DFNT
♦
ProLinx Wireless
High Speed Wireless EtherNet/IP Gateway
ProSoft Technology, Inc.
Page 35 of 45
August 12, 2008
6
Default Module Configuration Assignments
In This Chapter
IP
Addresses ......................................................................................... 35
WATTCP
Parameters............................................................................ 35
6.1 IP
Addresses
IP Address are assigned in ranges to each of the WA modules. This information
is used in the Radio Ethernet Configuration section of the configuration file. The
following table shows the range assignments and the default value pre-
configured in the module:
Module
IP Address Range
Address Set in the Module (Default)
6105-WA-PDPM 172.16.10.100
-
172.16.10.109 172.16.10.100
6104-WA-PDPS 172.16.10.110
-
172.16.10.119 172.16.10.110
6201-WA-MCM 172.16.10.120
-
172.16.10.129 172.16.10.120
6201-WA-MNET 172.16.10.130
-
172.16.10.139 172.16.10.130
6201-WA-DFCM 172.16.10.140
-
172.16.10.149 172.16.10.140
6201-WA-DFNT 172.16.10.150
-
172.16.10.159 172.16.10.150
6201-WA-ASCII 172.16.10.160
-
172.16.10.169 172.16.10.160
6201-WA-104S 172.16.10.170
-
172.16.10.179 172.16.10.170
6201-WA-DEM 172.16.10.180
-
172.16.10.189 172.16.10.180
6201-WA-RIO 172.16.10.190
-
172.16.10.199 172.16.10.190
6303-WA-MBP 172.16.10.200
-
172.16.10.209 172.16.10.200
The purpose for reserving up to 10 IP addresses per module is for addressing
and establishing radio communications between modules of the same model
number (for example 6201-WA-DFNT to 6201-WA-DFNT).
6.2 WATTCP
Parameters
The following default parameters are applicable to all WA modules:
Radio_Subnet_Mask :
255.255.255.0
Radio_Default_Gateway:
172.16.10.1
