6201-WA-DFNT
♦
ProLinx Wireless
Configure the 6201-WA-DFNT 150 Module
High Speed Wireless EtherNet/IP Gateway
Page 12 of 45
ProSoft Technology, Inc.
August 12, 2008
3.1
Complete the ProSoft Configuration Builder Sections
3.1.1 Radio
Ethernet Configuration
1
Double-click the
icon.
Every EtherNet/IP module is set up with the defaults shown in the example. You
may have to modify values such as the Radio Default Gateway, the Network
Name (SSID), and the Station Name to suit the needs of your network. The
Station Name may be modified when using more than one EtherNet/IP module.
Note: All modules must have the same Subnet Mask, Default Gateway, and Network Name (SSID)
if they are all located on the same network. Only the fourth octet in the Radio_IP address must be
different for each module. Please refer to Default Module Configuration Assignments (page 35) for
a list of pre-assigned ProSoft product IP addresses.
The PWP Driver Manual located on the ProLinx Solutions CD contains a
description of the remaining parameters. If you are making changes, be sure to
save your changes before moving on to the next step.
