One-time recording (OTR)
One-time recording lets you set the video to record for between half an hour and 10 hours.
32
1 Put in a cassette and choose a programme or the other
equipment you want to record from, as described under
‘Recording’ on page 29.
2 Press the RECORD/OTR button on the video recorder or the
record (red dot) button on the remote control once, then once
more for every 30 minutes you want to record. You can record
for up to 10 hours if there is enough tape on the cassette.
◆
The video recorder display confirms the recording time. For example, ‘R1:30’ in
the video recorder display panel means the recording will last for one hour and
thirty minutes. This time reduces as the recording is made.
◆
A red ‘TMR’ in the display panel shows that a timed recording is running.
◆
If the cassette reaches its end, it will just stop.
◆
You can stop timed recording by pressing and holding the
(stop) button for at
least five seconds, until ‘TMR’ and the recording time (R-:--) go off the display.
VCR
TMR
L
R
R e c o r d i n g
Summary of Contents for PROline VN2000
Page 1: ......
