19
Use of rotisserie accessories
Pass the skewer through the chicken and lock the clamps,
insert the tip of the skewer into the hole found at the rear
panel of cavity and make sure that it completely leans on
the frame and fits in motor shaft.
To do this, first you have to turn the lid to the side, which
is found infront of the skewer insertion hole, as shown in
the figures. After that, fit the skewer onto the skewer grid
(placed on the third rack) or skewer bracket (placed on
the holes of tray). Remove the handle from screwer, if it
is installed and close the oven door. The handle must be
attached only for removing the food after grilling.
Make sure that the oven is not operating while performing
these operations.
skewer bracket
tray on second rack
skewer
skewer handle
skewer insertion
hole
18
