Each time you press
/
, the steaming time will decrease or increase by 5 minutes.
3.
When the steaming time is set, wait for about 3 seconds and the setting will be confirmed.
You will hear a beep and the red indicator light will illuminate.
The food steamer is heating and time will start counting down.
To cancel the steaming function
,
press
O/I
again. The red indicator light will go out.
Keep Warming Function
When the steaming process has completed, you will hear 2 beeps, the indicator light will turn green and the
symbol
will be displayed next to the clock time
.
The keep warming function will work for about 2 minutes every 10 minutes. This process will repeat until
there is insufficient water in the reservoir or the food steamer is switched off by pressing
O/I
.
After Use
1.
Press
O/I
to turn off the appliance and unplug it from the mains socket.
2.
Carefully remove the lid from the food steamer using oven mitts or a cloth (not supplied).
CAUTION:
When steaming has completed, the food steamer will be hot. Take care when removing the lid
as steam will escape and the steamer baskets and rice bowl will be hot.
3.
Remove the baskets and place them on a heat resistant surface.
4.
Allow the food steamer to cool before cleaning.
Setting the Timer
You can use the timer function to set the desired time you want to steam food.
Before setting the timer, make sure that that the clock time is set.
Setting the clock
After plugging the food steamer into the mains socket, you will see the time digits on the display.
1.
Press and hold
PROG
and
O/I
at the same time.
You will hear a beep.
2.
Adjust the clock to the current time by repeatedly pressing
/
.
The time will increase in 10-minute intervals and decrease in 1-minute intervals.
3.
Press
PROG
to confirm.
Timing the steaming function
4.
Press
PROG
until the time digits “00:00” and the text “PROG” will flash on the display.
5.
Set the time by repeatedly pressing
/
.
The time will increase and decrease in 10-minute intervals.
6
Downloaded from www.vandenborre.be
