11
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed
to use the abrasive agent or some paper towel becauseof the risk of scratching or leaving spots on the stainless steel surface.
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because they will
scratch the finish. Some papers towels can also scratch or leave marks on the surface.
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Rather, use only a cloth and warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water and a little
white vinegar, or a cleaning product made specifically
for dishwashers.
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove
the plug from the socket, turn off the water supply and
leave the door of the appliance slightly ajar. This will help
the seals last longer and prevent odors from forming
within the appliance.
If the appliance must be moved, try to keep it in the vertical
position.If absolutely necessary, it can be positioned on
its back.
One of the factors that cause odors to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.
ELECTRICAL CONNECTION
For your safety please read the following information
The appliance must be connected to a 220-240 volts 50 cycle AC supply bymeans of a three pin socket, suitably earthed and should
be protected by a 13amp fuse in the plug or a15 amp fuse in the consumer unit.
GREEN/YELLOW
Earth
BROWN
Live
BLUE
Neutral
FUSE
13 Amps
Cord clamp
Green and Yellow - Earth
Blue – Neutral
Brown – Live
There is a danger of electric shock if the cut off plug is inserted into any 13amp socket outlet.
The appliance is supplied with a rewireable 13 amp 3 pin plug fitted with a 13amp fuse. Should the fuse require replacement, it must
be replaced with afuse rated at 13 amp and approved to Bs1362.
If the mains plug is unsuitable for the socket outlet in your home or is removedfor any other reason, then the cut off plug should be
disposed of safely toprevent the hazard of electric shock.
The brown wire must be connected to the terminal marked L or coloured red.
Important
The wires in the mains lead on this appliance are coloured in accordance withthe following code:
As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows.
The green and yellow wire must be connected to the terminal in the plugwhich is marked with the letter E or with the earth symbol
or colouredgreen and yellow.
The blue wire must be connected to the terminal marked N or coloured black.
