ProLights TRIBE LUMIPIX12UT, User Manual

Page: 31 / 44

9 LUMIPIX12UT
3.4 AUTO SHOW
This fixture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows
P--
, then press the button ENTER.
• Using UP/DOWN button, select one of the programs P1 - P14 .
• Press the button ENTER to confirm.
• Press the button MENU until S-- appears on the display.
• Use the button UP/DOWN to select the auto programs speed S1 - S100 (slow-fast).
• Press the button ENTER save the setting.
3.5 STATIC COLOR
This fixture has the ability to accept custom static color settings. Access these chases via the control panel
on the back of the fixture.
• Press the button MENU so many times until shows C-- , then press the button ENTER.
• Using UP/DOWN button, select one of the programs C1 - C7 .
• Press the button ENTER to confirm.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.6 SOUND MODE
In music mode, the LUMIPIX12UT can be controlled by music with a clear rhythm in the bass range. If the
music control should not work optimally, increase the volume or reduce the distance of the sound source.
• Press the button MENU so many times until the display shows
Snd
.
• Press the button ENTER to confirm.
• You can set the microphone sensitivity pressing the button MENU so many times until the display show
Sens .
• Using the button UP/DOWN, select the desired value sensitivity (slow-fast) u0 - u100 .
• Press the button ENTER to confirm.
14 Snd
15
Sens
ð
Value (001-100) Default:80
16 U - -
ð
Value r (000 -255) Default: RGB=255
Value g(000 -255)
Value b(000 -255)
17 dIM
ð
OFF Default: OFF
dIM1
dIM2
dIM3
18 SET
ð
On Default: ON
OFF