17
LUMIPIX12UT
Manual Color Control
To choose a specific color with the controller:
1. Press MANUAL on the controller.
2. Press any number between 0-9 to choose your color.
To manually control the RGB percentage:
3. Press MANUAL on the controller.
4. Press R, G, B, A, W, P to choose your color.
5. Press + or – to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press STROBE on the controller.
2. Press + or – to increase or decrease the strobe rate.
3. Press STROBE again to turn off the strobe.
To change the switching effect of the program:
• Press FADE/SNAP on the controller.
3.15 DIMMER
• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows
dIM
, and press the button ENTER to confirm.
• Press the button UP/DOWN to select
OFF - dIM1 - dIM2 - dIM3.
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.16 OPERATION THROUGH THE IRC CONTROLLER
To control the LUMIPIX9UHE with the infrared remote control:
• Press the button MENU
repeatedly until
SET
, then press button ENTER to confirm.
• Using UP/DOWN button to select
On
or
OFF
to enable or disable the infrared remote control.
• Press the button ENTER to confirm the chose.
NOTE - Make sure to point the controller directly at the receiver on the product.
Automatic Mode
Automatic Mode will enable you to run the automatic programs on the
product.
To turn on Automatic Mode:
1. Press AUTO on the controller.
2. Press + or – to choose between the different auto programs.
To adjust the speed of the automatic program:
3. Press SPEED on the controller.
4. Press %.
5. Press + or – to either increase or decrease the speed of the program.
Sound Active Mode
Sound Active Mode will enable the product to respond to the music.
To turn on Sound Active mode:
1. Press SOUND on the controller.
To adjust sound sensitivity in Sound Active mode:
1. Press SENSITIVITY on the controller.
2. Press %.
3. Press + or – to either increase or decrease sound sensitivity.
Fig.8
IRC REMOTE
BLACK
OUT
AUTO
STROBE
SPEED
SOUND
SENSI-
TIVITY
%
MANUAL
FADE
R
G
B
+
0
1
2
3
4
5
6
7
8
9
A
UV
W
Summary of Contents for TRIBE LUMIPIX12UT
Page 1: ...MANUALE UTENTE USER MANUAL IT EN LINEAR LED BATTEN LUMIPIX12UT ...
Page 42: ......
Page 43: ......
