ProLights STARKBAR1000, User Manual

Page: 32 / 52

STARKBAR1000 6
2.1 MOUNTING
The may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the
unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For fixing, stable
mounting clips are required. According to the figure, the bolts of the brackets are placed into the openings
provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit
is firmly fixed to avoid vibration and slipping while operating. The mounting place must be of sufficient
stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-
tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force
in the country in which the fixture’s being used. Always additionally secure the projector with the safety
rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum
fall of the projector will be 20 cm.
Fig.3
ALISCAFF
CLAMP
SAFETY
CABLE
OMEGA
BRACKETS
- 2 - INSTALLATION