ProLights STARKBAR1000, User Manual

Page: 43 / 52

17 STARKBAR1000
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset
between All, Tilt e Others .
• Press the ENTER button to confirm your choice and wait for the recovery of the selected function.
Calibration
Select this function to calibrate and adjust the wheels of the effects in their correct positions:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button keys to scroll the menu, select the
Set
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Calibration and press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Password and press ENTER to con-
firm.
• Use the arrow keys to enter the password 050 and press ENTER to confirm.
• Once you have entered your password, you can set the values for Password, Tilt, 1led red,1led green,1led
blue,2led red,2led green,2led blue,..., 18led red,18led green,18led blue . Press the UP/DOWN button to scroll
through the menu, select one of the functions mentioned above and press ENTER to confirm your
choice.
• Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Reload Default
Select this function to reset the unit to factory settings:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reload Default and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select the favourite recovery mode Basic Reload/Program Reload/ Private
Reload/All Reload , then press the ENTER button to confirm.
• Press the UP/DOWN button to select ON or OFF , then press the ENTER button to confirm.
3.14 FIXTURE INFORMATION
To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
- Time Information - Through the Time Information function you can display the operating time of the
projector .
-
Lamp Info
- Through the Lamp Info function you can display the lamp information
.
- Temperature - Through the Temperature function can be displayed the temperature inside the fix-
ture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
- Fans Speed - Through the Fans Speed function you can show on display the fan speed present near
the lamp. Velocity is expressed in RPM (revolutions per minute).