STARKBAR1000
18
-
Channel Value
- Channel Value function can be used to display the values of the channels by which
the unit will operate when switched on.
-
Error Message
- Through the Error Message function can be displayed any errors channels.
-
Fixture Model
- Through the Fixture Model function can be displayed the model number and manu-
facturer.
-
Software Version
- Through Software Version function you can display the currently installed software
version.
• Press the LEFT button repeatedly to exit the menu.
3.15 OPERATIONS IN AUTOMATIC MODE
The unit independently runs through its show. Before you send an automatic program you need to set the
drive as Master/Alone:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Program
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Play
and press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Sequence
and press ENTER to confirm
your choice.
• Press the UP/DOWN button to select the mode of operation:
-
Master
, if the unit is connected in series with other units and it acts as the Master;
-
Alone
, if the unit is not connected to other units.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The unit will go into automatic mode by executing the program automatically.
Select Chase
The function
Select Chase
lets you choose the automatic program to actually run.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Program
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Select Chase
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select
Chase Part 1/Chase Part 2/Chase Part 3
and press ENTER to confirm.
• Press the UP/DOWN button to select
Chase1-Chase8
, and press the ENTER button to confirm.
• Press the LEFT button repeatedly to exit the menu and save changes.
Edit Chases
The function
Edit Chases
allows you to create automatic pre-programmed show.
The automatic programs
Chase Part1/2/3
are each divided into
Chase1-Chase8
. Each Chase can be composed
of
1-64 step
that can be configured through the following procedure:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the
Program
icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chases
and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
Edit Chase 1 - Edit Chase 8
, then press the
ENTER button to confirm.
• Press the UP/DOWN button to select the
Step 01 - Step 64
, and press ENTER to confirm.
Summary of Contents for STARKBAR1000
Page 1: ...MANUALE UTENTE USER MANUAL STARKBAR1000 MOVING HEAD IT EN ...
Page 50: ......
Page 51: ......
