SPIRIT
2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
•
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
•
The unit is supplied with hazardous network voltage (220V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
•
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
•
The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
•
This unit is not for home use, only professional applications.
•
Never use the fixture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps.
•
Make certain that no inflammable liquids, water or metal objects enter the fixture.
•
Do not dismantle or modify the fixture.
•
All work must always be carried out by qualified technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
•
If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
•
For inside use only. Not designed for outside use.
•
Always unplug your Fog Machine before filling its tank.
•
Always keep fog machine in upright position.
•
Turn off or unplug the machine when not in use.
•
This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing, immediately
unplug the unit and contact a service technician or your dealer before using it again.
•
Never aim the output nozzle directly at people.
•
Fog machine output is very hot. Avoid coming within 50 cm of the output nozzle during operation.
•
Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee
adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
•
Never aim the output nozzle at open flames.
•
Always allow your Fog Machine to cool down before attempting to clean or service it.
•
Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.
•
Use only high-quality, fog liquid that your dealer recommends. Other fog liquids may cause clogging
or “spitting”.
•
Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause
damage to the pump as well as over-heating of the heater.
•
If your Fog Machine fails to work properly, discontinue use immediately. Drain all fog liquid from the tank,
pack the unit securely (preferably in the original packing material), and return it to your dealer for service.
