7
SPIRIT
Refer to the table below to access and settings:
BUTTON
INSTRUCTIONS
FUNCTION
Press the button FUNCTION until the display indicates:
[INTERVAL SET]
,
[DURATION SET], [VOLUME
OUT]
or
[DMX 512 ADD].
•
[INTERVAL SET] -
Use the buttons UP/DOWN to adjust the intervals between the individual fog
outputs in timer mode within the range of 10 and 300 seconds.
•
[DURATION SET] -
Use the buttons UP/DOWN to adjust the duration of the fog outputs in timer
mode within the range of 10 and 100 seconds.
•
[VOLUME OUT] -
Use the buttons UP/DOWN to adjust the fog output volume in continuous mode. To
set the unit to continuous fog output in continuous mode, select »NON STOP BURST«
NOTE: When »NON STOP BURST« is selected, the fog machine adjusts the fog output volume and heater
temperature automatically and does not need to stop the fog output to reheat.
•
[DMX 512 ADD] -
Use the buttons UP/DOWN, to set the machine to the same address as on your
DMX controller. Please refer to chapter DMX512 settings for moreinformation on DMX operation.
UP
Button for increasing numerical value
DOWN
Button for decreasing numerical value
TIMER
Pushing this button, the machine will work according to the set up interval time and, duration
VOLUME
Pushing this button, the unit will issue the volume in accord with VOLUME OUT.
MANUAL
Pushing this button, the unit will issue its maximum volume. When the button is released the unit will
return to its original state. This function can be executed under any circumstances.
Fig.2
FUNCTION
VOLUME
MANUAL
TIMER
