17
EVO64CYC
3.13 STATIC CONFIGURATION
To set the custom balance of red, blue and green:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
[STAT]
.
Press the button ENTER to confirm.
•
Select the color red, green, blue, white or amber
(RED - GREN -BLUE - WHITE - AMBER)
through the buttons UP/
DOWN and then press the button ENTER.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
•
Set the value of the
[STRB]
tra
(0 - 20)
through the buttons UP/DOWN.
3.14 EDITING CUSTOM PROGRAMS
To set the custom balance of red, blue and green:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
[EDIT]
.
Press the button ENTER to confirm.
•
Select the program
PR.01 - PR.10
.
•
Each custom program has 30 steps that can be edited.
•
Each step allows the creation of a scene using red
(RED)
, green
(GREEN)
, blue
(BLUE)
, white
(WHITE),
amber
(AMBE), (STRB)
,
(TIME)
and
(FADE)
.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
3.15 SPECIAL FUNCTIONS
Press the button MENU and select through the directional buttons the
[SETTINGS]
mode; and press the but-
ton ENTER to confirm.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
It is possible to view to following functions:
UPLOAD
•
Select
[UPLd]
to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the
main access password.
REST
•
In order to reset custom modesto default values select
[REST]
.
COLOR
•
[COLO]
is for activate/deactivate the color calibration functions.
- When
[RGBW]
is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2
(RGBW).
- When
[COLOR]
is set
[OFF]
, on RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When
[UC]
is selected, the RGB output adjusted to a standard preset universal color which
balances fixtures from different generations.
DIMMER
•
Enter
[dIMX]
to select dimmer mode and dimmer speed. When dimmer is set to
[OFF]
, the RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer,
[DIM1]
is the
faster, while
[DIM4]
is the slowest.
NOTE - The factory default setting is
[DIM4]
.
Summary of Contents for EVO64CYC
Page 1: ...EN IT Manuale Utente User Manual EVO64CYC STAGE THEATRE LED...
Page 25: ......
Page 51: ......
