17
ARCLED8107Q
3.16 SPECIAL FUNCTIONS
•
Press the button menu and select through the directional buttons the
[SET]
mode; and press the button
ENTER to confirm.
It is possible to view to following functions:
UPLD
•
Select
[UPLD]
to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the
main access password.
•
When uploading the Master and Slave units will display yellow.
•
If an error occurs when uploading the Master and/or Slave units will display red.
•
On successful uploading of the custom programs the Master and Slave units will display green.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
REST
In order to reset custom modes to default values select [REST].
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
COLOR
[COLO]
is for activate/deactivate the color calibration functions.
- When
[RGBW]
is selected, on RGB =255, 255, 255 the color is displayed as calibrated in RGBW.
- When
[COLO]
is set [OFF], on RGB =255, 255, 255 the RGB values are not adjusted and the output is
most powerful.
- When
[UC]
is selected, the RGB output adjusted to a standard preset universal color which balances
fixtures from different generations
.
DIM
Enter to
[DIM]
to select specific dimming curve. When dimmer is set to
[OFF]
, the dimmer is linear.
DIM1/2/3/4
are speed modes of the linear dimmer;
[DIM1]
is the faster, while
[DIM4]
is the slowest.
DERR
Enter to
[DERR]
to control in case of DMX signal errors.
-
[SAVE]
saves the latest data DMX on error DMX signal.
-
[BLACK]
allows you to activate the mode on error DMX blackout.
3.17 PASSWORD FUNCTION
Enter the [
KEY]
mode to select whether the access password is on or off.
•
Press the button MENU so many times until show
[KEY]
and press the button ENTER to confirm.
•
Select
[ON]
or
[OFF]
.
•
Set the value
000 - 255
, through the buttons UP and DOWN.
When the fixture is set as pass
[ON]
, after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Summary of Contents for ARCLED8107Q
Page 1: ...EN IT Manuale Utente User Manual ARCLED8107Q ARCHITAINMENT LED PROJECTOR...
Page 23: ......
Page 24: ......
Page 47: ......
