ProLights ARCLED8107Q, User Manual

Page: 33 / 48

9
ARCLED8107Q
SET
UPLD PASS ****
**** SEND
REST
END
END
REST PASS
COLO RGBW
UC
OFF
DIM1
DIM2
DIM3 DIM
DIM4
OFF
SAVE
BLAK DERR
MENU
KEY ON
OFF
CAL2
RED
GREN
BLUE
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
CAL1 WT.01
WT.02
WT.11
RED
GREN
BLUE
WHIT
R.(0 - 255)
G.(0 - 255)
B.(0 - 255)
W.(0 -225)
..
.
CAL ****
3.4 OPERATION IN AUTOMATIC MODE
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows [AUTO] , then press the button ENTER.
• Press the button UP/DOWN to switch between the programs ( AT.01 - AT.10 or PR.01 - PR.10 ). The unit will
operate in automatic mode.
IMPORTANT: Programs AT.01 - AT.10 are fully pre-programmed and will not be altered by changes in EDIT
mode. Programs PR.01 - PR.10 are fully pre-programmed and can be edited in EDIT mode.
NOTE - In automatic mode the unit will be set as Master.