Prolife PA2 BT, Instruction Manual

Page: 7 / 76

7
en
5.
Press the TIME button again - the first character (hours) will blink on the
display. Set the hour using the MEMORY button.
6.
Press the TIME button again - the last two characters (minutes) will blink
on the display. Set the minutes with the MEMORY button.
7.
Press the TIME button again to complete device settings. The input
is confirmed , the clock is turned on. The current time is displayed
on the screen.
8.
To view the date, press the TIME button.
Additional Information
With each press of the button ( TIME, MEMORY ) one input is made
(e.g. switching over from hours to minutes mode, or altering the value by +1).
However, if you keep the MEMORY button depressed, you can switch more
quickly to find the desired value respectively.
MEASUREMENT PROCEDURE
Measurement preparation
•
Avoid eating, smoking as well as all forms of exertion directly. All these
factors influence the measurement result. Try and find time to relax
by sitting in an armchair in a quite atmosphere for about ten minutes
before the measurement.
•
Measure always on the same arm (normally left).
•
Try to carry out measurements regularly at the same time of the day,
since the blood pressure level changes during the course of the day.
TIME TIME
TIME TIME