Prolife PA2 BT, Instruction Manual

Page: 12 / 76

12
en
ERROR MESSAGES / MALFUNCTION
If an error occurs during a measurement, the measurement is discontinued
and a corresponding error code is displayed.
Error code Possible cause(s)
The device can not determine the value of the pulse
The influence of external impact on the measurement results.
Reason: The arm was moved during the Measurement (Artefact)
The inflation of the cuff takes too long. Reason: the cuff is not
correctly seated
The measured readings indicated an unacceptable difference
between systolic and diastolic pressures. Take another reading
following directions carefully. Contact you doctor if you continue to
get unusual readings
If pressure is over 290 mmHg
Other possible malfunctions and their elimination
If problems occur when using the device, the following points should be checked
and if necessary, the corresponding measures are to be taken.
Malfunction Remedy
The device does not
turn on
Check batteries for correct polarity and if necessary insert
correctly
Check batteries performance and replace if necessary