Prolife PA2 BT, Instruction Manual

Page: 11 / 76

11
en
Deleting all measurement results from the device's memory
Before you delete all readings stored in the memory, make sure you will not
need refer to the readings at a later date. You may keep a self–monitoring diary
and record data in writing to provide additional information to your doctor.
In order to delete all stored readings,
press and hold the MEMORY button for
at least 5 seconds until the display shows
“CL” , then release the button. The "CL"
symbol will start blinking. To permanent-
ly clear the memory, press the MEMORY
button while the "CL" symbol is blinking.
APPEARANCE OF THE
ARRHYTHMIA INDICATOR
This symbol indicates that certain pulse irregularities were detected
during the measurement.
In most cases, this is no cause for concern (for example, with the so-called
respiratory arrhythmia, which is a normal variant). However, if the symbol ap-
pears on a regular basis (e.g. several times a week with measurements taken
daily), you are advised to inform your doctor.
Please show your doctor the following explanation.
This device is an oscillometric blood pressure monitor that also analyses pulse
frequency during measurement. The device is clinically tested. The arrhythmia
symbol is displayed after the measurement, if pulse irregularities occur during
measurement.
The device does not replace a cardiac examination, but serves to detect
rhythm disturbance at an early stage.
5 sec