4
ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
• This unit is suitable for indoor use onl
y.
• Clean this unit periodicall
y
. Clean only using water and mild soap; dry with a soft cloth.
Never use rough cloth, abrasives or chemical cleaners containing acids or harsh solvents.
• Bulb Replacement: Use 75-watt GU10(GU111)-base bulb or less.
WARRANTY
TROUBLESHOOTING
Manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for
one (1) year from the date of original purchase.
This warranty does not cover parts becoming defective due to misuse, accidental damage,
improper handling and/or installation and specifically excludes liability for indirect, incidental or
consequential damages. Product found to be defective may or may not be replaced with same or
like type product, contingent on the nature of the defect, and or replacement availability and or
compensated for at a pro rated value.Some states do not allow limitations on how long an implied
warranty lasts, and/or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific rights and
you may also have other rights, which vary from state to state.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Ground side of track
head connector and
track section are not
aligned
Align ground side of track head connector
(side of the connector with two metal tabs) and
track section (indented groove on face and two
internal copper bars)
Bad main suppl
y
wiring Consult a certified professional electrician
Defective switch
Consult a certified professional electrician
Fuse blows or
circuit trips when
fixture is turned on
W
rong wiring or power
wire is grounding out
Consult a certified professional electrician
Light will not turn on
If you have any questions regarding the product, please call our customer service department at
1-866-389-8827, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
3. To remove track head from track, allow track head to
cool down, grasp track head connector and pull down
while twisting until track head disengages. See Fig. 3.
3
A
Printed in China
Lowes.com
Project Source is a registered trademark of L
F
, LLC. All rights reserved.
®
