Proheat 200690K, Installation Instructions Manual

Page: 9 / 9

ITEM DESCRIPTION QTY UOM
34 Compressor Shaft Assembly 1 ea
35 Spring Washer 1 ea
36 Snap Ring 1 ea
37 Connecting Rod Assembly 1 ea
38 Set Screw, #10-32 x 3/8, SHSS 1 ea
39 Screw, #8-32 x 1/2, FHSCS SS 1 ea
40 Intake Disk 1 ea
41 Diaphragm 1 ea
42 Compression Disk 1 ea
43 O-Ring, 2-010 2 ea
44 O-Ring, 2-035 1 ea
45 O-Ring, 2-031 1 ea
46 Cylinder Head 1 ea
47 Gear, Compressor, 48 Teeth, Black 1 ea
48 Retaining Ring 3 ea
49 Gear, Motor, 38 Teeth, Black 1 ea
50 Loctite
®
620 (.5 ml Tube) 1 ea
51 Loctite
®
242 (.5 ml Tube) 1 ea
Reassembly Parts Checklist
ORIENTATION
BOSS
HEAT EXCHANGER
FLANGE NOTCH
COMBUSTION TUBE
Figure M.
21. Install the burner head back onto the heat exchanger and secure
with two screws (item 1).
22.
Operate heater for a minimum of two cycles to ensure functionality.
Inspect for fuel leaks around the exterior of the burner head and
heat exchanger.
Copy Part# 206000, Rev. E Page 9 of 9
Date: 05/2017
© 2010 Marine Canada Acquisition Inc. DBA SEASTAR SOLUTIONS 3831 No. 6 Road, Richmond, B.C. Canada V6V 1P6 Tel: 604.270.6899 Web: www.proheat.com
INSTALLATION INSTRUCTIONS