If you do not touch
, the
appliance deactivates after 20
seconds.
The maximum setting of the
time for the DURATION is 90
minutes.
You can change the microwave
power (touch and then
or
) and the DURATION
(touch ) any time when the
Microwave function operates.
4. When the set time ends, an acoustic
signal sounds for 2 minutes. The
Microwave function deactivates
automatically. Touch a sensor field to
stop the acoustic signal.
To deactivate the appliance, touch .
If you touch or open the
door, the function stops. To
start it again, touch
.
The maximum time of microwave
functions depends on microwave power
you set:
MICROWAVE
POWER
MAXIMUM TIME
100 - 600 W
-
More than 600 W
7 minutes
Setting the Combi function
1. Activate an oven function. Refer to
"Setting the oven function".
2. Touch and do the same steps as
when you set the Microwave function.
The Combi function is not available with
the function END, SET + GO.
If you set the END function
for the normal oven function, it
changes to the DURATION
in the Combi function.
If you set the DURATION
function for the normal oven
function, it stays active for the
Combi function. If the set
DURATION is longer than 90
minutes, it is not possible to
activate the Combi function.
When you use the Microwave function in
Combi mode the Microwave power cannot
be more than 600 W.
Setting the Quick Start function
1. Touch to deactivate the appliance.
2. Touch
to activate the Quick Start
function.
Each touch of
adds 30 seconds to the
duration time.
You can change the microwave
power (refer to "Setting the
Microwave function").
3. Touch to set the time for the
DURATION function. Refer to "Setting
the DURATION".
CLOCK FUNCTIONS
Clock functions table
Clock function
Application
COUNT UP TIMER
To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of
the appliance.
Progress 13
