EXELLE 35
One-piece automatic closing plastic footrest
This footrest folds and unfolds
automatically
as
the
wheelchair is closed and
opened.(See chapter 5.2 and
5.3 “Opening and closing
system”) (see figure 59).
The angle of the one-piece automatic closing footrest can be
adjusted exactly like the one piece flip-up footplate (see section
“One-piece flip-up plastic footplate”).
Position of the one-piece footrests
In the order form, the one-piece footrests can be request to be
mounted in three different positions: 2/3 internal (fig.59/a – 59/d),
completely internal (fig.59/b – 59/e) or completely external (fig.59/c
– 59/f). These configurations depend exclusively on how the parts
are assembled (3mm and 5mm Allen keys are necessary).
Rotative system support
This kind of support (figure 60) allows a greater adjustment of the
footplate. It can be applied only to the one piece plastic footplates
(flip-up or automatic closure).
To adjust the inclination and the
position of the footplate, loosen
the bolts “A”, “A1” and “B” (4
and 5mm Allen key) (figure 60)
helping yourself with a 10mm
spanner for the nut matched to
the bolt “A1”.
Perform the height and position
adjustment by rotating the lever
“C”.
Once reached the desired
position, ad just the inclination
and fix all bolts
One piece flip-up carbon fibre footplate
This model can be raised by pulling up the carbon fibre plate with
one hand (fig.61). When lowering the footplate, ensure that the
engaging tooth locks in its bed.
.
To adjust the angle of one-piece footrest it is sufficient to loosen
the two bolts “L” (5 mm Allen key) and turn the footrest, as
Fig. 59
One piece flip-up
One piece with authomatic closure
Fig. 59a Fig. 59b Fig. 59c
Fig. 59d Fig. 59e Fig. 59f
Fig. 61
Fig.60