ProGear 300LS, Owner'S Manual

Page: 24 / 32

SPECIFICATIONS:
TIME ---------------------------------------------------- 00:00-99:59 MIN: SEC
SPEED ------------------------------------------------- 0.0-999.9
MPH
DISTANCE -------------------------------------------- 0.00-99.99 MILE
CALORIE ---------------------------------------------- 0.0-999.9 KCAL
PULSE ------------------------------------------------- 40-200 BPM
USING YOUR COMPUTER CONSOLE
The computer console can be activated by pressing the MODE button
or by pedaling. If you leave the equipment idle for 4 minutes, the power
will turn off automatically.
MODE BUTTON FUNCTIONS:
Press the MODE button once to select the desired function of the
computer console.
Press and hold the MODE button for 4 seconds to reset all data values.
COMPUTER CONSOLE FUNCTIONS:
SCAN: Press the MODE button until the arrow points to SCAN, the computer console
will automatically scan through each function except the PULSE function every 6
seconds.
TIME: Press the MODE button until the arrow points to TIME, the computer console
will display your elapsed workout time in minutes and seconds.
SPEED: Press the MODE button until the arrow points to SPEED, the computer
console will display the current training speed.
DISTANCE: Press the MODE button until the arrow points to DISTANCE, the
computer console will display the cumulative distance traveled during the workout.
CALORIE: Press the MODE button until the arrow points to CALORIE, the computer
console will display the ESTIMATED number of calories you have burned during the
workout. Please note that the readings are only estimates and there are many factors
that can’t be accounted for such as fitness level, body fat percentage, age, weight,
and gender.
PULSE: Press the MODE button until the arrow points to PULSE, the computer
console will display your current heart rate readings. This will work ONLY if BOTH
hands are gripping the hand-pulse sensors. No readings or inaccurate readings may
occur if only one hand is gripping the hand pulse sensor.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer console.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Ensure that the batteries are correctly positioned and the battery springs are in physical contact
with the batteries.
4. Replace the battery cover on to the back of the console.
5. If the display is illegible or only partial segment appears, remove the batteries and wait 15
seconds before reinstalling.
22
COMPUTER