8. Bottle holder and Tension Control Knob Installation:
First turn the
Tension Control Knob (37)
to the lowest setting (counterclockwise). Hook the end of
the resistance cable connected to the
Tension Control Knob (37)
to the
Tension Cable (79),
See
Figure B
. Insert the remaining cable at the end of the
Tension Control Knob (37)
in to the slot on
top of the
Tension Cable (79),
See
Figure C
. Turn the
Tension Control Knob (37)
to the highest
setting (clockwise), then remove the
Clip
(101)
from the
Tension Cable (79).
Safely dispose of the
Clip (101).
Mount the
Tension Control Knob (37)
to the
Hand Pulse Support Frame (41)
as shown in Figure
D. Secure the
Tension Control Knob (37)
to the
Hand Pulse Support Frame (41)
with the
Cross
Recessed Pan Head Screw (100).
Tighten the screw with the
Multi-Hex Tool with Phillips
Screwdriver
until it is firm and secure.
Attach the Bottle Holder (40)
onto the
Hand Pulse Handlebar Support Frame (41)
with two
Bolts (38)
. Tighten both
Bolts (38)
using the
Multi Hex Tool with Phillips Screwdriver
.
Caution:
Do not force the
Tension Control Knob (37)
beyond its lowest or highest settings. Refer
to our Tension Adjustment page 26.
ASSEMBLY
19
(38) Bolt
2PCS
(100)
Cross Recessed Pan
Head Screw
1PC
Hardware:
Summary of Contents for 300LS
Page 5: ...LABEL PLACEMENT 3...
Page 7: ...5 OVERVIEW DRAWING...
Page 10: ...HARDWARE TOOLS PACK 8...