1. Front/Rear Stabilizers and Adjustable Levelers Installation:
Align the holes of the
Front Stabilizer (54)
to the bracket located at the front end of the
Mainframe
(59).
Make sure the arrow sticker on the
Front Stabilizer (54)
is pointing
up
so that the
Transport
Wheels (93)
are positioned toward the front and parallel to the floor. Insert two
Bolts (52)
through
the
Front Stabilizer (54)
and secure with two
Curve Washers (55)
and two
Cap Nuts (56).
Using
the Open-Ended Flat Wrench, tighten the
Cap Nuts (56)
until they are secure.
Align and attach the
Rear Stabilizer (62)
to the bracket located at the bottom of the back end of
Mainframe (59)
with two
Bolts (52).
Secure the
two Bolts (52)
with two
Curve Washers (55)
and
two
Cap Nuts (56).
Using the Open-Ended Flat Wrench, tighten the
Cap Nuts (56)
until they are
secure.
Hardware:
Tools:
Open-Ended Flat Wrench
(52) Bolt
4PCS
(55) Curve Washer
4PCS
(56) Cap Nut
4PCS
10
ASSEMBLY
10
Summary of Contents for 300LS
Page 5: ...LABEL PLACEMENT 3...
Page 7: ...5 OVERVIEW DRAWING...
Page 10: ...HARDWARE TOOLS PACK 8...
