36
-
When using cleaning agents other than water, choose a neutral pH fluid (pH = 7), and rinse with clean water. Be sure that:
o
these cleaning agents are compatible with all the elements of the exchanger and are not likely to corrode materials
used for the manufacturing of the exchanger
o
these cleaning agents used have no impact on the environment, either by using non-aggressive products or by
collecting and treating the effluents resulting from the cleaning of the batteries
5.4
FAN MOTOR CHANGE
This operation can only be undertaken once the electrical supply has been switched off (consignation).
Under this condition only, the access to fan motors is authorized.
Remarks :
If a fan motor needs to be changed, care should be taken to unplug all purge holes during reinstallation (to enable the condensation to
escape). The purge hole are located on the body of the motors).
400 mm
Summary of Contents for SOPRANO 50
Page 12: ...11 TENOR50 D montable...
Page 13: ...12 Manutention au transpalette...
Page 30: ...28 TENOR50 Removable...
Page 31: ...29 Palet truck...
