RMI3
13
www.profoto.com
Regulatory Information
World-wide Usage of Radio Spectrum
The RMI3 operates on the license-free 2.4GHz ISM band for SRD (Short Range Devices).
This band may be used in most parts of the world. Regional restrictions may apply.
NOTE!
Refer to national regulations for the region where the RMI3 module shall be
operated and make sure that they are followed.
Europe
The RMI3 module is in conformity with the essential requirements and other relevant
requirements of the Radio Equipment Directive (2014/53/EU).
Please note that every end product using the RMI3 module will need to undergo EMC
testing according to EN 301 489-17 V3.1.1 (or later).
For RF, conduced test results can be inherited from the RMI3 test report to the end product
using RMI3. Limited EN 300 328 V2.1.1 (or later) testing for radiated spurious emission
is necessary and the test must be repeated with the end product using the RMI3 module.
FCC (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Integration instructions for host product manufacturers according to KDB 996369
D03 OEM Manual v01
2.2 List of applicable FCC rules
15C
2.3 Specific operational use conditions
This module is approved for use in portable and mobile applications. Integrators
must supply operating instructions for end users and installers to satisfy RF exposure
