©2015 Hot Melt Technologies, Inc
Page 11
Proflex
®
G9
Electrical
Ground Fault Equipment Protection (GFEP)
Genesys 2
340-222
Set Mode
Run Mode
Ground Fault Equipment Protector (GFEP)
Indicator Window
ON - Hose and Gun Zones
are Active
OFF - Hose and Gun Zones
are Inactive
ON/OFF Switch
(Pictured in ON Position)
TEST
LOAD
LINE
Test every 3 months
per manufacturer’s
recommendation.
This adhesive dispensing system is equipped with a Ground Fault Equipment
Protector (GFEP) that has been installed on the circuit powering the hose
and gun zones. This GFEP is designed to protect the hoses from
an unintended ground fault.
GFEP must be switched ON (Indicator window RED) for hose and gun
zones to heat.
If a ground fault is detected on any hose or gun zone, the GFEP will
switch OFF (Indicator window GREEN) removing power from all hose
and gun zones.
If the GFEP switches OFF due to a ground fault during operation,
contact HMT Technical Service & Support for assistance.
