PROFILO PSS81000, User Manual

Page: 15 / 24

15
PSS81000-001_v01
To● reduce● the● temperature● press● the fabric and steam
emission selection button ● „ ”● (every● pressing● is●
accompanied●by●a●sound●signal).●On●LCD●display●you●will●
see●the●options●displayed●in●opposite●order●than●in●the●case●
of●increasing●the●temperature.
When one of the options from 1 to 4 is selected
(from „ ” to „ ” ), you
can iron in dry mode only and no steam is
generated. If you operate the iron with these
settings, you will see red pilot light.
3 ● The pilot light ●switches●off●automatically●as●soon●as●the●
selected●temperature●of●iron●baseplate●is●reached.
When one of the options from 5 to 9 is selected
(from „ ” to „ ”), you
can use the steam while ironing.
4
●When● the● steam● boiler● is● being● heated,● on● the● LCD●
display● you● will● see● the steam boiler heating indicator ●
●blinking.●As●soon●as●the●appropriate●temperature●is●
reached,● the steam boiler heating indicator ●stops●blinking●
and●shall●be●no●longer●displayed●on●LCD●display.
5 ●Set● the steam emission button ● to● the● appropriate●
position●( ●–●steam●is●emitted●from●the●openings●placed●
in●the●front●part●of●the●iron;● ●–●steam●is●emitted●from●all●
openings●of●the●iron).
Regular steam mode can be used for
settings starting from „ ”
to „ ”. Use the professional
steam mode for settings „ ”,
„ ” and „ ”.
6 ●If●the●baseplate●of●the●iron●and●steam●boiler●are●ready●to●
use,● the red pilot light ●disappears●and● the green pilot light
switches ●on.
7 ●The●appliance●is●ready●to●use.
Mounting the cord wraps
●
●
Unwind●and●straighten●the●power●cord.
1
●Insert● the cord wraps ● into● one● of● the● two● openings●
located●at●the●top●part●of●the●steam●station.
2 ●Wind●the●power●cord●around●the● cord wraps .
Preparing the steam generator to operation
1 ●Unwind● and● straighten● the● connection● cable● and● the●
power●cord.
2 ●Fill● the water reservoir ●(see:●Filling●the●water).●
3
●Start●the●appliance●(see:●Starting●the●appliance).
FIRST IRONING
1 ●Proceed● as● described● in● section● “Preparing● the● steam●
generator●to●operation”.
2
●Select● water● hardness● level● by● pressing● the water
hardness selection button .●Proof● the water hardness
level ●by●using●the●water●hardness●tester●(see:●Proofing●the●
water●hardness●tester).
3 ●Select●the●maximal●steam●emission●level●by●pressing● the
fabric and steam emission selection button ● „ ”● until●
you●see●MAX●setting●displayed●( ).
4
● The steam boiler heating indicator ● ● starts● to●
blink●signalling●that●the●steam●boiler●has●started●to●heat.
5 ●Shift●right● the steam emission regulator ●to●the●position●
.
6 ● The steam boiler heating indicator ● ● stops●
blinking● (no● longer● displayed● on● LCD● display)● as● soon● as●
selected●temperature●of●the●steam●boiler●is●reached.
7
●When●the●iron●baseplate●and●the●steam●boiler●are●ready●
to●use,● the red pilot light ●will●be●switched●off●and● the green
pilot light ●will●be●switched●on.
8 ●The●appliance●is●ready●to●use.
9 ●Keep● the steam emission button ●pressed●for●ca.●1●min●
in●order●to●clean●the●steam●emission●system.●
10 ●Press● the steam emission button ● in● order● to● steam●
iron.●In●order●to●initiate●steam●emission●it●may●be●necessary●
to●press● the steam emission button ●several●times.
11 ●While● the steam emission button ●is●being●pressed,●you●
will●see●steam●emission●level●indicator●blinking●on●the●LCD●
display.
12
●It●is●recommended●to●iron●a●less●precious●item●at●the●very●
beginning,●e.g.●an●old●towel.
C